"Cost Effective EMP Protect Solution"


Meeting IEC Standards and MIL-STD-188-125-1 Standards

Today, most ICT infrastructures are not protected against the threat of EMP. EMP shielding racks are designed to protect major data storage units, communication equipments, and other network devices in any places where EMP protect solution is needed.

Features


  • Designed to meet International and Military Standards

    Tested and verified on shielding effectiveness meeting IEC standards and MIL-STD-188-125-1 standards

  • Fully Customizable for the Needs

    Dynamic Shielding Series EMP shielded racks are completely customizable

    • Fixed / Movable Types
    • For Automatic Control
    • For Telecommunication
    • For Satellite Communication
    • For Storage Equipment

STANDARD SPECIFICATIONS


Type Description
BAND FREQUENCY
  • 10kHz – 1GHz (customizable up to 18GHz)
SIZE
  • 40U, Standard 19-Inch Rack
DIMENSION
  • 750mm(W) x 1,000mm(D) x 2,000mm(H)
WEIGHT
  • 250kg or less
Standards Requirement
  • International Standards (IEC61000-2-11)
  • MIL-STD-188-125-1
SE PERFORMANCE
  • Single Knife: 60 – 80dB @ 10kHz – 1GHz
  • Dual Knife: 80 – 100dB @ 10kHz – 18GHz
DOORS
  • Front Door
  • Front and Rear Doors: Used for internal inspection/maintenance
EMP FILTER
  • 250V, 50Hz - 60Hz
    Insertion Loss : 10KHz – 1GHz (20 – 100dB or more)
  • Voltage Drop Test
    Applied Voltage / Load Condition : 220 VAC / 2.5A (within 1% of rated voltage)
  • Leakage Current
    Applied Voltage 220 VAC (20mA or less)
HOENYCOMB
  • Shielding Effectiveness: 100dB @ 10kHz – 18GHz
COOLING UNIT
  • Maintain internal temperature by circulating air through cooling fan

Options


THERMO-HYGROSTAT SYSTEM

Self-controlled Operation
  • Maintaining suitable conditions(temperature, humidity, and dust control) for normal operation of mounted equipments
Low Power & High Efficiency
  • High efficient energy saving with sealed (IP6) and internal circulation duct

SEISMIC ISOLATION SUPPORT

Seismic Isolation Technology
  • 1 set per rack (4 sheets) / 300x300mm per slider
  • Loads up to 11.16 ton per set
  • Easy installation (No floor work needed)
  • Can be installed indoors or outdoors
  • Verified performance from offical cerificate authority in Japan (MTI)

EMP SHIELDED RACK MONITORING SYSTEM

Real-time monitoring and integrated control solution for inside temperature, door open/close, voltage, and cooling fan operation condition

UPS

Provide suitable UPS that meet the power consumption capacity for mounted equiptments
  • Displays control, status, and alarm functions